Toshiba 26HF84 - Manual (Page 34)

34
If the signal does not include aspect information, the picture size you
selected on pages 31 and 32 is displayed.
To turn on the ASPECT feature:
1. Press MENU, and then press or until the SETUP menu appears.
2. Press
▲ or ▼ to highlight ASPECT, and then press or to select
ON.
SETUP
CLOSED CAPTION
PICTURE SIZE
PICTURE SCROLL
CINEMA MODE
ASPECT
IMAGE TILT
:SELECT :ADJUST
OFF
VIDEO
ON / OFF
0
Selecting the cinema mode
When you view a DVD movie (3:2 pulldown processed) from a DVD
player connected to the ColorStream (component video) inputs on the
TV, smoother and more natural motion can be obtained by setting the
CINEMA MODE to FILM (auto).
To set the CINEMA MODE to FILM (auto):
1. Press MENU, and then press or
until the SETUP menu appears.
2. Press ▲ or ▼ to highlight CINEMA
MODE, and then press or to
select FILM (auto).
To set the CINEMA MODE to VIDEO (off):
Press or to select VIDEO in step 2 above.
SETUP
CLOSED CAPTION
PICTURE SIZE
PICTURE SCROLL
CINEMA MODE
ASPECT
IMAGE TILT
:SELECT :ADJUST
OFF
FILM / VIDEO
OFF
0
Selecting the display format (for 480p signals
only)
This feature converts an input signal 480p to 540p or 1080i.
To select the display format:
1. Press MENU, and then press or until the PICTURE menu
appears.
2. Press ▲ or ▼ to highlight DISPLAY FORMAT.
3. Press or to select 540p or 1080i.
PICTURE
COLOR
TEMPERATURE
DISPLAY FORMAT
SVM
RESET
:SELECT :ADJUST
COOL
540p / 1080i
LOW
Menu
Using the ASPECT feature
When the ASPECT feature is set to ON and the TV receives a
480i signal, the picture size is automatically selected (as described in
the following table).
Aspect ratio of signal source
4:3 Normal
16:9 Full
4:3 Letter box
Not defined
Automatic aspect size
(automatically selected
when ASPECT is ON)
Natural
Full
Theater wide 2
User-set mode
Using the TV’
s
Features
Note:
• The ASPECT is also available when
viewing HDMI input source of 480i or
other format.
• The ASPECT operates according to
aspect information indicated in the digital
signal of HDMI.
Notes:
• The DISPLAY FORMAT feature is available
only for 480p input. 1080i is always output
when a signal other than 480p is input.
• If you notice flicking in a 480p image, try
setting the DISPLAY FORMAT to 540p.
3R40121A/E P31-37 6/7/04, 18:58 34