Toshiba MULTIFUNCTIONAL DIGITAL COLOR SYSTEMS 3530C - Manual (Page 139)

4.PRINTING FROM UNIX
Printing from an Application 137
4 PRINTING FROM UNIX
‰ Banner Page
A banner page is automatically generated for each file in each job. The banner page contains the following items. The
banner page is always sent as a PCL5e job.
y The name of the user that submitted the print job.
y The job ID number and from which workstation it was submitted.
y The title of the job. This title can be specified using the “-t” option. The same title is used for every file within a job. The
default title is controlled by the “lp” command.
y The name of the printer or its IP address.
y The date and time when the job was printed according to the print server.
Only one copy of the banner page is printed for each file, even if a number of copies of the job are requested. The banner
page is sent to the equipment as a separate sub-job so that it is never stapled to the document.
The banner page is printed with the following settings.
y Copies = 1.
y Stapling off.
y Orientation = portrait.
y Duplex off.
y Paper size as requested by the “-o” parameter or the printer’s default value.
y The paper source and the media type for the banner page can be set to different values than the job’s paper source
and media type.
y Auto paper source selection or the requested banner page source or media type.
y Output bin as requested by the “-o” parameter or the printer default value.
y 6 lines per inch
y Auto-wrap on.
y Automatic carriage-return when a line-feed is sent.
y The banner page is designed to fit the paper bigger than Statement / A5.
The banner page uses the default paper size if paper is set to:
-Statement
-A5
-A6
-B5
-Postcard
y The default is that the banner page is printed before the job so that it is in the correct stacking order.
y When the language is set to “raw” the banner is always disabled.
y The paper source and the media type for the banner page can be set to different values than the job’s paper source
and media type. If a banner paper source is not specified then the auto source command is sent. If a banner media
type is not specified then no banner media type command is sent, so the printer’s default value will be used.
y If the file being printed specifies the paper destination or the paper size internally the banner page may print to the
wrong output or on an incorrect paper size.
y Hole punching cannot be applied to banner pages.