THORENS TEP 3800 - Manual (Page 31)

Specifications
31
System Preamplifier
Amplification factor
Frequency response
Signal-to-noise ratio
Zoom function -14dB
Output impedance
XLR → Cinch
XLR → XLR
Cinch → Cinch
Cinch → XLR
XLR-out, Load = 600 Ohm
XLR-out, Load = 10 kOhm
Cinch-out, Load = 10 kOhm
XLR-out
Cinch-out
Control function
Level lowering when adjusting the volume control with total amplification = x1: -14 dB;
level lowering when volume control at maximum: 0 dB
XLR-out
Cinch-out
16 dB
16 dB
16 dB
16 dB
2.5 Hz - 600 kHz, +0/-3 dB
0.7 Hz - 600 kHz, +0/-3 dB
0.7 Hz - 300 kHz, +0/-3 dB
> 98 dB, based on 1 V output level
A – DIN certified
> 96 dB, based on 1 V output level
A – DIN certified
almost double logarithmic
< 1 Ohm
< 60 Ohm
Outputs
Amount of inputs
1 x XLR
1 x Cinch
1 x Tape-out (Cinch)
6, 2 of which are optionally XLR or
Cinch (CD and AUX1)
Weight (net) 12.0 kg (26.5 lbs)
Dimensions (WxHxD) 450 x 120 x 360 mm
17.7 x 4.7 x 14.2 "
Power consumption 100 W
No standby function
Mains supply country-specific;
see rear panel of appliance
Manufactured in Germany
All data are specific and subject to change.