Toshiba SD-240ESE - Manual (Page 54)

56
Function setup
Setting details
Customizing the Function Settings (continued)
TV Shape
1) Press / to select the Video.
2) Press ENTER.
3) Press ENTER button, then press the / to
shift and change the TV type
4) Press ENTER.
5) Press RETURN.
4:3 Pan Scan: Select when a standard 4:3 TV is
connected.
Displays pictures cropped to fill
your TV screen. Either or both
sides of the picture are cut off.
4:3 Letterbox: Select when a standard 4:3 TV is
connected.
Displays theatrical images with
masking bars above and below the
picture.
16:9 Widescreen: Select when a 16:9 wide TV is
connected.
Notes
• The displayable picture size is preset on the DVD
video disc. Therefore, the playback picture of some
DVD video discs may not conform to the picture size
you select.
• When you play DVD video discs recorded in the 4:3
picture size only, the playback picture always appears
in the 4:3 picture size regardless of the TV shape
setting.
• If you select “16:9 Widescreen” and you own a 4:3 TV
set, the DVD playback picture will be horizontally
distorted during playback. Images will appear to be
horizontally compressed. Always be sure that your TV
shape conforms to the actual TV in use.
TV System
1) Press / to select the Video.
2) Press ENTER.
3) Press / to select the TV system.
4) Press ENTER button, then press / to shift
and change the Video system.
5) Press ENTER.
6) Press RETURN.
NTSC: Select if your TV system is NTSC.
PAL:
To play a PAL disc. Connect a PAL TV to
view a picture.
Auto: The DVD video player automatically
identifies PAL or NTSC video system of a
disc. Connect a multisystem TV (PAL/NTSC
compatible) to view a picture.
A playback picture may be distorted when
detected a signal change between PAL and
NTSC on the disc.
For the case of Progressive mode, your
multisystem TV must be able to support
525p and 625p.
Video Output
1) Press / to select the Video.
2) Press ENTER.
3) Press / to select the Video Output.
4) Press ENTER button, then press / to shift
and change the Progressive Signal.
5) Press ENTER.
6) Press RETURN.
CVBS: Select if you connect the DVD to TV via
SCART cable or composite video input.
YUV: Corresponding to your TV which has a
YUV (component video) inputs.
Progressive mode can only be on when
YUV is selected.
RGB: Select if you connect the DVD to TV via
SCART cable.
Video
DVD
PAL
YUV
PAL
AUTO