Technika CR-114IPH - Manual (Page 17)

15
LISTENING TO THE RADIO
To listen to the radio:
Press the • RADIO button to select radio operation.
The radio tuning screen will be displayed.
To change from FM band to AM band:
After selecting Radio mode, press the • RADIO button
repeatedly to switch between FM and AM bands.
The tuning display will show the selected band.
Scanning for a station:
Press and • hold the ] or [ button to scan up or down
the band.
When the next station is reached, scanning will stop and the
station frequency will be displayed.
If reception quality is poor, try adjusting the position of the
aerial wire (FM) or loop aerial (AM) for the best sound.
Manual tuning:
Press the • ] or [ button on the front panel briefly to
tune manually.
Browsing the preset stations:
Press the •
M
or
N
button to step through the preset
stations.
The preset number will change, the radio will re-tune and the
frequency of the preset selected will be displayed.
NOTE: Refer to the Radio Options section on the next page for
details of storing preset stations.
Preset display
(appears when a preset
station is tuned)
Digital frequency display
Time display
Analogue frequency
bargraph