Topcom Xplorer 874A - Manual (Page 10)

Remark !
• For Windows 95 users, please run first the MSDUN13.EXE application.
• This application can be found on the installation CD at:
<CD-ROM>:\Driver\Win95\MSDUN13.EXE
• For Windows 98, NT 4.0, ME and 2000 this application may not be installed!
INSTALLATION :
• Power off your computer
• Install the PCI card into your computer and connect your ADSL line.
• Reboot your computer.
• New hardware is found.
• Follow the instructions of the installation wizard.
• for Windows 95 :
• Use the driver path : <CD-ROM>:\Driver\Win95\
If CD-ROM drive is D then use D:\Driver\Win95\
• for Windows 98 :
• Use the driver path : <CD-ROM>:\Driver\Win98\
If CD-ROM drive is D then use D:\Driver\Win98\
• for Windows NT 4.0 (Service Pack 6A or higher is required) :
• Use the driver path : <CD-ROM>:\Driver\WinNT\
If CD-ROM drive is D then use D:\Driver\WinNT\
• for Windows Me (Millenium) :
• Use the driver path : <CD-ROM>:\Driver\WinMe\
If CD-ROM drive is D then use D:\Driver\WinMe\
• for Windows 2000 :
• Use the driver path : <CD-ROM>:\Driver\Win2K\
If CD-ROM drive is D then use D:\Driver\Win2K\
• The Xplorer 810 will be installed now.
• Click ‘Yes’ when asked to reboot your computer.
Xplorer 810
10
QUGuide Xplorer810 28/8/01 11:10 am Page 10