Toshiba IK-629A - Manual (Page 7)

1-5
8. WHITE BALANCE (AWB)
Note
In this camera, the white balance is automatically adjusted corresponding to
the color temperature variations on the object.
This camera is applicable to color temperature of 2500 to 10K.
When external light and internal light are mixed or when the object includes
some chromatic colors are shot, a hue may partly have a little difference.
9. LINE-LOCK PHASE
If two or more cameras within a system
have different AC line phases are switched
by the video switcher, the picture on the
monitor TV will fluctuate vertically.
Connect 24V AC input lines of all cameras
so that they all share the same phase.
If you still have vertical fluctuation, adjust
the V.PHASE controller.
10. DAY / NIGHT FUNCTION
This function is activated when the DAY/NIGHT switch is set to on .
Under the low light condition, IK-629A automatically cuts the croma signal,
and displays the clear picture without noise.
AES
AC 24V ~ GND
LEVEL
VIDEO
VIDEO OUT
DC
H
L
DC 12V ...
V PHASE
V. PHASE CONTROLLER
ON
OFF
DAY / NIGHT (ON/OFF)
O
N 1 2 3 4
ON
OFF
DAY / NIGHT LEVEL
O
N 1 2 3 4
If this switch is set to High (ON position), the croma cut level is set less than
40 to 50 IRE.
11. NOTES ON USE AND INSTALLATION
Do not aim the camera at the sun
Do not aim the camera at the sun or point it at sun even if you are not
shooting.
Do not shoot intense light
Intense light such as a spotlight may cause a bloom or smear. A vertical
stripe may appear on the screen. However , this is not a malfunction.
Treat the camera with care
Do not drop the camera or subject it to strong shock of vibration. Otherwise,
the camera may malfunction.
Never touch internal parts
Do not touch the internal parts of the camera other than the parts specified.
Otherwise, the camera may malfunction.
If the DAY / NIGHT LEVEL switch is set to Low (OFF position), the croma cut
level is set less than 20 to 30 IRE.
DAY / NIGHT (ON/OFF)
DAY / NIGHT LEVEL
The default setting is "Low". "High" is for a brighter setting than "Low".