Toshiba Blu-Ray Disc Player BDX1200KU - Manual (Page 15)

1
E
ng
lis
h
6. Press OK, enter Resolution setting. . Press OK, enter Resolution setting.
Previous
Auto
480i
480p
720p
1080i
1080p
OK Next
Choose
a resolution that fits your TV.
Change will be applied immediately, you have
15s to determine whether to save the setting
or rollback to prior resolution. Better
performance will be provided by an HDMI
connection!
Press / to select an option. Press OK.
Select "Yes" or "No" using /.
Note:
-When the player is connected to both VIDEO
OUTPUT jack and HDMI OUTPUT jack, resolution is
set to 720p/1080i/1080p, there will be no video
output through VIDEO OUTPUT jack.
Previous
14s
Yes
No
OK Next
Resolution
has been changed!
Does everything looks all right with this
resolution? Press Yes if you want to apply it.
Press No to rollback to previous one.
7. Press OK, enter Aspect ratio setting. . Press OK, enter Aspect ratio setting.
Previous
16:9 Full
16:9 Normal
4:3 Pan&Scan
4:3 Letterbox
OK Next
Choose
an aspect ratio that fits your TV.
The change will be applied in the next page.
Determine whether to save the setting or
rollback to the previous aspect ratio.
Press / to select an option. Press OK.
Finish Previous OK
Setting
wizard is complete!
Now press the OK button to finish and return
to the Setup Menu.
8. Press OK to return to [General Setting] . Press OK to return to [General Setting]
Menu.
• [Upgrade]
For software upgrades to enhance
performance, you could select the
following upgrade method and start to
upgrade.
{Disc}/{USB Storage}
Upgrade the software from the disc or USB
Flash device.
1. Insert the disc or connect the USB Flash
device which contains the upgrade file
package.
2. Follow the instruction on the TV
screen to confirm upgrade operation.
- The system will reboot after 5 seconds or
OK key is pressed.
Notes:
- If set [Disc Auto Playback]to [Off], after you
insert the disc that contains the upgraded
information to upgrade system, you have to start
upgrade from this option of SETUP Menu.
- If the upgrade file package did not pass the
verification, error prompt is displayed , check the
package again (such as the package is not
complete)
- Make sure the firmware version is not an old
version.
- When you upgrade the system using USB Flash
device, you should make a new folder named
UPG_ALL, and copy the upgrade file into this
folder.
• [External Memory]
External Memory would be used in BD-
Live™ function. When you plug in the
USB flash device which has at least 1GB
free space to play BD-Live™ function,
the Blu-ray Disc™ system would make a
directory named BUDA automatically.
Information will display the Free size.
1. Press OK.
2. Follow the instruction on the TV
screen to select {Information}.
System Screen Save Off
On
On
On
More...
Language Disc Auto Playback
Playback CEC
Security Disc Auto Upgrade
Network Load Default
General Setting
RETURN Return
Information
Free size is : 0MB
Move cursor key to select menu option
then use “OK ” key to select
Erase
3. Press OK to select "Erase", the data
in the BUDA folder will be cleared.
[Language]
Set up the OSD (On-Screen Display),
Menu, Audio and Subtitle default language
for the player.
System OSD English
English
English
English
Language Menu
Playback Audio
Security Subtitle
Network
General Setting
SETUP Exit
Move cursor key to select menu option
then use “OK ” key to select
• [OSD]
Select the default on-screen display language.
• [Menu]
Select the default menu language.