Toshiba E-STUDIO 352 - Manual (Page 99)

How to Perform Internet Fax 99
3
Specify the following items as you require and press the [Next] but-
ton.
y RESOLUTION
Select the resolution before you scan the original to be sent.
When sending to an Internet Fax destination only, [FINE] resolution will be applied even if
you select [U-FINE].
y MODE
Set the image quality mode before you scan the original to be sent.
[TEXT] — Press this when scanning the originals that contain text.
[TEXT/PHOTO] — Press this when scanning originals that contain text and photos.
[PHOTO] — Press this when scanning originals that contain photos printed on
photographic paper.
The transmission time may be longer when the TEXT/PHOTO or PHOTO mode is
selected.
y EXPOSURE
Set the image density according to the contrast of the original to be sent.
In the automatic exposure mode, the copier automatically judges the contrast of the
original, and selects the optimum contrast.
In the manual exposure mode, you can adjust the contrast manually in 11 steps.
y TX TYPE
When sending Internet Fax, you can only select the [MEMORY TX] button.
y ORIGINAL
Select the button corresponding to the original size, or select the [AUTO] button to
automatically detect the original size.
When placing different-width originals, select the [DIFFERENT WIDTH] button.
For Internet Fax, LT or LG size originals are sent in the same size as the originals. Origi-
nals larger than those sizes are reduced to LT to be sent. Originals smaller than those
sizes are sent in LT without being enlarged.