Thermador VCI 230/236/248 DS User Manual

Page 9

Advertising
background image

PAGE 7

Step 4: CONNECTING THE UNIT

There are two operating modes:

with flange mounted blower or
with external blower

Operating mode with flange mounted blower

in combination with VTI 610 D only.

Remove blower assembly pipe socket.

Remove hood pipe socket.

Keep the screws!

Match the hood exhaust opening with the blower intake
opening. Mount the blower by using the initial holes and
reinserting the ductwork screws.

Operating mode with external blower

in combination with VTI 610 D, VTI 1010 D, VTR 630 D,
VTR 1030 D, VTR 1500 only.

If a Wired Remote Control (VCI 2 REM) is being used,
refer to remote control instructions.

Advertising