Topaz Systems AM10 - Manual (Page 6)

6
AM10
Integrated
Amplifier
CD Tuner / DAB BD / DVD Menu Phono MP3 / Aux
MP3 In Phones On / Off
Volume
Front panel controls
1 2 3 4
6
8
7
Power On/Off
Switches the unit on or off.
Headphones socket
Allows for the connection of stereo headphones with a ¼ inch jack plug.
Headphones with an impedance of between 32 and 600 ohms are
recommended.
Note: Plugging in headphones will automatically mute the loudspeaker
outputs.
Infrared sensor
Receives IR commands from the supplied remote control. An
unobstructed line of sight between the remote control and the sensor is
required.
MP3 input socket
This source input allows you to connect a portable audio device such as
an MP3 player directly into the front of the unit using a 3.5mm stereo-jack.
Once plugged in, this input is automatically selected, although other
inputs can still be selected once a stereo-jack is plugged in. The MP3/AUX
button on the front of the unit will select this input whilst a stereo-jack is
plugged in.
Note:
– Plugging a source into the front panel MP3 input overrides the Aux input.
Simply remove the jack from the front panel to automatically re-enable
the Aux input.
– Also note that as the output level of MP3 players tends to be quite low,
the AM10 adds 10dB to the current volume setting when (and only
when) the MP3 input is selected.
Input source buttons (MP3/Aux, CD, Tuner/DAB,
Phono, BD/DVD)
Press the relevant source button to select the desired input source.
Display
Used to display information such as the selected input source, volume and
tone/balance levels.
Note: When first purchased, the display will have a protective film over the
top. Peel this off for a clear display.
Menu button
Pressing this once will select the Bass option. Pressing a second time will
select the Treble option and pressing a third time will select the Balance
option. When one of these options is selected, the volume control will
adjust the level. If nothing is pressed for a while, the source will be
displayed and the volume control will go back to controlling the volume
level.
Volume control
Use to increase or decrease the level of the sound from the outputs of the
unit. This controls the volume level of the loudspeakers and headphones.
It does not affect the level of the ‘Rec Out’ output. The volume control will
also change the level of bass, treble and balance in the menu options.
1
2
3
4
5
6
7
8
5