Setting up your tv/dvd, Using the remote control, Installing the remote control batteries – Toshiba Lcd TV/DVD Combination 23HLV86 User Manual

Page 21

Advertising
background image

21

DVD Playback

Using the

TV/D

VD’

s Features

Setting up

your TV/DVD

Connecting

your TV/DVD

Introduction

Appendix

Setting up your TV/DVD

Using the remote control

Installing the remote control batteries

To install the batteries:

1. Open the battery cover on the back of the remote control.

2. Install two “AAA” size batteries. Match the + and – signs on the

batteries to the signs on the battery compartment.

3. Close the battery cover on the remote control until the lock snaps.

Note:

The TV/DVD remote control may not operate
your VCR, DVD player, or cable TV converter.
Refer to the owner's manual supplied with
your other devices to see which features may
be available. Additionally, the remote control
for this TV/DVD may not support certain
features available on the original remote
controls for your other devices, in which case
it is suggested that you use the original
remote control for the applicable device.

Caution:

• Never throw batteries into a fire.

Note:

• Be sure to use AAA size batteries.
• Dispose of batteries in a designated

disposal area.

• Batteries should always be disposed of with

the environment in mind. Always dispose of
batteries in accordance with applicable
laws and regulations.

• If the remote control does not operate

correctly, or if the operating range becomes
reduced, replace batteries with new ones.

• When necessary to replace batteries in the

remote control, always replace both
batteries with new ones. Never mix battery
types or use new and used batteries in
combination.

• Always remove the batteries from the

remote control if they are dead or if the
remote control is not to be used for an
extended period of time. This will prevent
battery acid from leaking into the battery
compartment.

Setting up

your TV/DVD

5X60301A(E)P11-21

21/4/06, 12:11 PM

21

Advertising