Toshiba X3030 - Manual (Page 20)

English
21
PICTURE
Picture settings OK
3D Colour management Off
Base colour adjustment
Active Backlight Control On
Cinema mode On
MENU Back EXIT Watch TV
2/2
Picture controls
To return to the original factory settings select Reset
in the Picture position menu and press OK.
Picture position – analogue only
The picture position may be adjusted to suit personal
preference and can be particularly useful for
external inputs.
In the SET UP menu press e until
Picture position is highlighted.
1
Press OK to view the options available for the
picture format that has been selected.
Press f and e to select an option, then z or x
to adjust the settings.
The options alter depending on the widescreen
format chosen and when viewing connected
equipment.
In Cinema 2:
2
3
In the Picture settings menu press e to select
Backlight.
Press z or x to adjust.
2
3
In the PICTURE menu press e to select
Picture settings, then press OK.
1
Adjusting the Backlight can improve the clarity of the
screen when viewing.
Backlight
Picture position
Horizontal position 0
Vertical position 0
Reset OK
MENU Back EXIT Watch TV
Picture settings
Backlight 100
Contrast 100
Brightness 50
Colour 50
Tint 0
Sharpness 0
MENU Back EXIT Watch TV
1/2
SET UP
Picture position OK
Quick Setup OK
MENU Back EXIT Watch TV
Most of the picture controls and functions are available in both digital and analogue modes. To access the
required menus when in digital mode: press MENU and using
e select TV setup, press OK then z or x to
select the desired menu. PLEASE NOTE: features not available in digital mode will be greyed out. To access the
required menus when in analogue mode: press MENU and use
z or x to select the desired menu.
C3000D Eng Euro OM 28/1/07 8:09 pm Page 21