Toro 14AP80RP744 - Manual (Page 30)

30
SECTION 14: SPECIFICATIONS*
* Toro reserves the right to change product specifications, design, and standard equipment without notice and without incurring obligation
** Kohler’s horsepower ratings exceed Society of Automotive Engineers Small Engine Test Code J1940. Actual engine horsepower is lower and
affected by, but not limited to, accessories (air cleaner, exhaust, charging, cooling, fuel pump, etc.), application, engine speed and ambient
operating conditions (temperature, humidity, and altitude).
GT2100
Capacities
Fuel Tank 3.0 gal. (11.4 liters)
Engine Crankcase (w/ filter) 57.5 oz. (1.7 liters)
Constant Velocity Transmission
Forward Speed 0 - 5.2 mph (8.2 km/h)
Reverse Speed 0 - 2.3 mph (3.7 km/h)
Engine (Air-cooled, 4-cycle)
Make Kohler Courage
Model SV720
Cylinders Twin
Bore 83 mm (3.27 in.)
Stroke 67 mm (2.64 in.)
Displacement 725 cc (44.2 cubic in.)
Power @3600 RPM 17.2 kW (23 HP)**
Maximum Torque 60.9 Nm (44.9 ft. lb.)
@ 2000 RPM
Compression Ratio 9:0:1
Engine Speed (governed) 3375 RPM
Low Speed 1200 RPM (± 75 RPM)
Spark Plug Gap .76 mm (.030 in.)
Electrical System
System Voltage 12-volt Negative Ground
Battery 235 CCA (sealed)
Alternator 15 Amp Regulated
Fuse (automotive type) 20 Amp
Headlights Incandescent
Brakes Single Disc (Dry)
Turf Tires
Front (inches) 16 x 7.5 x 8
Rear (inches) 23 x 10.5 x 12
Dimensions
Cutting Width, Deck 50 in. (127.0 cm)
Wheelbase 46 in. (116.8 cm)
Length, over all 68 in. (172.7 cm)
Width, over all 54 in. (137.2 cm)
Height, over all 43 in. (109.2 cm)
Ground Clearance 4.5 in. (11.4 cm)
Turning Radius 21 in. (53 cm)
Weight (approximate) 745 lb. (338 kg.)