TANDBERG Codian HD MCU 4500 Series - Manual (Page 12)

8
Step three: Add endpoints (optional)
One way to add participants to a conference that you create is to have the MCU
automatically call them when the conference starts. To do this, you configure their
endpoints on the MCU. When you set up a conference, you can choose the
endpoints from the
Pre-configured participants
list. This is easier than entering
each endpoint’s details every time. Participants that are pre-configured for a
conference will automatically be called by the MCU to join that conference.
To define pre-configured endpoints:
1
In the web interface of the MCU, go to
Endpoints
:
To add a H.323 endpoint, click
Add H.323
To add a SIP endpoint, click
Add SIP
To add a VNC screen, click
Add VNC
2 Configure the endpoint settings you require, using the online help for further
assistance.
3 Click
Add endpoint
.