Toshiba 352/452 - Manual (Page 5)

Page 3
†
Sending a FAX (Cont’d.)
†
Setting Originals
When Using the Reversing Automatic Document Feeder
NOTE: When the originals are placed on the Reversing Automatic Document Feeder, the
uppermost page is first scanned and sent.
1. After aligning the edges of originals, place them
with their face up and slide the guides to the width
of the originals.
y You cannot mix A series format (A3, A4, A5)
and B series format (B4, B5) or LT series and
COMP. LT/A4 size originals are rotated 90
o so
that they are sent as LT-R/ A4-R originals.
y If a mixture of LD and LG, A3 and A4, or B4
and B5 originals are placed, they are sent in their
original sizes.
y When LD, LG, LT-R, COMP, A3 and B4, A4-R,
B5 originals are placed as shown in the figure on the
right, the pre-entered sender information is printed in
the shaded position shown (A) in the figure and sent
to the remote Fax.
y When LT, ST-R, A4, A5-R or B5-R originals
are placed as shown in the figure on the right, the
pre-entered sender information is printed in the
shaded position shown (B) in the figure and sent to
the remote Fax.