Tissot SEA-TOUCH 145 - Manual (Page 6)

*
OPT
OPT
6/12
SEA-TOUCH
www.tissot.ch 145_EN
SETTING > STANDBY
SETTING > SYNCHRONISATION
Standby mode is a battery economy mode. All the functions are deactivated, with only the time & date counters updated.
This mode economises the battery when the watch is not being worn.
Automatic switch to standby
mode after 10 seconds
Beep every second
a) The watch is in standby
b) / : stop the count,
the watch does not switch to standby mode
Back to time & date mode
Back to time & date mode
The watch needs to be synchronised if the watch hands do not display the same time as the digital
display, or if they are not correctly superimposed when accessing the functions.
The watch is desynchronised when its electric motor’s mechanism is disturbed due to heavy impacts
for example.
N.B.: The glass must be active to access the synchronisation mode.
Units display Synchronisation
setting mode
The hands should be
perfectly
superimposed in the
12 o'clock position
Position the hour hand
at 12 o'clock
Position the minutes
hand at 12 o'clock
Validate setting
Return to Time T mode
5 sec. or or
or or
or
Synchronised Desynchronised
Validate setting