Integrate backup power into voip networks – Tripp Lite H2561 User Manual

Page 2

Advertising
background image

2

© 2008 TRIPP LITE. ALL RIGHTS RESERVED. THE POLICY OF TRIPP LITE IS ONE OF CONTINUOUS IMPROVEMENT.

SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE.

ALL TRADEMARKS ARE THE PROPERTY OF THEIR RESPECTIVE OWNERS.

Integrate Backup Power into VoIP Networks

Voice over IP (VoIP) is exploding in popularity as an application for business

data networks. VoIP promises to consolidate a company's data and

telecommunications infrastructure as well as its support resources. As a

result, a company can lower its hardware and service costs while raising

productivity through the use of more elaborate and customizable telephony

applications.

Unfortunately, there are serious limitations inherent to the data networks

that are increasingly called upon to support VoIP. The primary limitation is

power availability. Before moving voice traffic from traditional circuit-

switched public phone systems to private data network connections, one

must consider a public phone system's unique attribute—battery support. In

order to deliver extremely high availability for such vital services as

emergency 911 support in the event of extended power outages, public

phone systems are connected to massive battery arrays.

While most data networks have some type of backup support during power

outages (provided by UPS Systems and/or generators), the backup runtime

is generally much less than the 4 to 8 hours of backup that is typically

provided for public phone systems. Because of this shortcoming, VoIP

applications generally require an increase in the UPS System-supported

power capacity (e.g. more or larger UPS Systems). Increased UPS System

capacity provides power for network-dependent phones and increases

overall backup runtime to ensure that normal telephone operation (including

911 service) remains available in the event of an extended power outage.

Reflecting on important lessons learned during its own transition to IP

telephony, Cisco provides several best-practice recommendations. One of

the most important recommendations is installing a UPS System to

guarantee availability:

“Plan Your Power: When an IP network carries voice,
reliability is essential. In case of an emergency,
people need to summon assistance by dialing 911.
When using inline power to switches and routers, make
sure they are connected to an uninterruptible power
supply [UPS System] to guarantee dial tone if the
power should go out.”

Source: Cisco Systems white paper “The Transition to IP Telephony at Cisco Systems”.

http://www.cisco.com/en/US/tech/tk652/tk701/technologies_white_paper09186a00800cb7fd.shtml

Advertising
This manual is related to the following products: