Topcom BUTLER E450 - Manual (Page 14)

14
Personalize the handset
Low battery
Handset out of range
6.4 Handset name
You can change the name displayed on the handset during standby (max. 9 characters). This
function allows you to personalize each handset.
6.5 Automatic answer
When there is a incoming call and the handset is on the base, the phone automatically takes the
line when lifted. This is the default setting, but can be set off:
6.6 Reset the handset
It is possible to return the phone to the original default configuration. This is the configuration
which was installed when you first received the telephone.
To return to default settings:
1 Enter the menu.
2 Select “HANDSET” and confirm.
3 Select “BEEP” and confirm.
4 Select “LOW BATTERY” and confirm.
5 Select “ON” to activate or “OFF” to deactivate and confirm.
1 Enter the menu.
2 Select “HANDSET” and confirm.
3 Select “BEEP” and confirm.
4 Select “OUT RANGE” and confirm.
5 Select “ON” to activate or “OFF” to deactivate and confirm.
1 Enter the menu.
2 Select “HANDSET” and confirm.
3 Select “NAME” and confirm.
4 Enter the name you want and confirm.
Press the delete key to delete a character. Press and hold the phonebook key to
exit the menu without taking any modifications into account.
1 Enter the menu.
2 Select “HANDSET” and confirm.
3 Select “AUTO ANSWER” and confirm.
4 Select “ON” to activate or “OFF” to deactivate and confirm.
1 Enter the menu
2 Select “SETUP” and confirm.
3 Select “DEFAULT” and confirm.
4 Enter the 4 digit PIN code (default =0000) and confirm.
4 GHI 6 MNO 5 JKL
4 GHI 6 MNO 5 JKL