TANDBERG MXP 550 - Manual (Page 24)

D1374201_User_Manual_T550_T770_MXP_CCM
16
3.2.2 Selfview
Selfview shows your outgoing picture. Normally this is the picture of your self (main
camera). Selfview is most useful for single monitor systems. On dual monitor
systems you already have selfview on the dual monitor. In a normal conference, the
far end side is displayed on main monitor. Pressing Selfview will result in near end
on main monitor. Outside a call, selfview is already displayed on the screens.
Pressing selfview will result in a black screen. Press selfview again to bring the
picture back.
Selfview shows your outgoing picture. Normally this is the picture of your self (main camera).
Selfview is most useful for single monitor systems. On dual monitor systems you already have
selfview on the dual monitor. In a normal conference, the far end side is displayed on main
monitor. Pressing Selfview will result in near end on main monitor. Outside a call, selfview is
already displayed on the screens. Pressing selfview will result in a black screen. Press selfview
again to bring the picture back.
How to use Selfview:
1. Press Selfview once to see a full screen picture of yourself (your outgoing video).
2. Press Selfview again to turn selfview off and go back to normal.