Tv r – Philips 51PW9303 User Manual

Page 19

Advertising

PIP

SWAP

PIP CH

FREEZE

SOUND

MUTE

SURF

A/CH

POWER

PICTURE

STATUS/

EXIT

POSITION

VCR

ACC

MENU/

SELECT

VOL

TV/VCR

ACTIVE

CONTROL

Cable Converter Box

Satellite Receiver

VCR

DVD Player

SING THE

ODE

ENTRY

ETHOD TO

ROGRAM

OUR

TV R

EMOTE

ow that you have looked up the four-
digit remote-control Direct-entry Code

for your brand of accessory device, you are
ready to follow the simple steps shown below
to program your TV remote.

Please read through all the steps before
beginning.

First, press and hold down the VCR
or ACC (for an accessory device
other than a VCR) mode button

the TV remote. Then press and hold
down the MENU/SELECT button at
the same time for a brief moment.
Release the buttons. The TV remote
back light will switch on.
NOTE: For correct operation, you
must first press and hold the mode
button and then press and hold the
MENU/SELECT button simultaneously.

Within 30 seconds of pressing the
VCR (or ACC) button and
MENU/SELECT button, enter a
four-digit code for the accessory
device

(see pages 21 and 22).

If you make a mistake while attempt-
ing to enter the four-digit code and
want to start again, press any button
other than one with a number. Then
return to step 1 to begin again.

Point the remote at the accessory
device.

Then press the POWER button

on the remote to turn the device on.

Using the Remote Control

• If you do not enter a complete code within

30 seconds, you will need to perform step
1 of the Code-entry Method again.

• If you enter more than four digits, the unit

will retain the first four digits entered.

• If the procedure explained above does not

work the first time, repeat the steps using
the same remote code number.

• If after a second try the remote does not

operate your accessory device, and more
code numbers are listed for your brand,
use the next listed code number.

• If after repeated attempts the Entry-code

Method does not allow you to work your
accessory device with your TV remote, try
the Search Method explained on the next
page.

ELPFUL

INTS