Telos NX12 - Manual (Page 133)

iSDN BRi LiNE ORDER
eTs-300 euro-Isdn
Telos nx12
To: Telephone Company
Attention: ________________________________
From
Company: _______________________________________
Address: ________________________________________________
City/State/ZIP: __________________________________
Phone: ________________________
Contact:______________________________
Location for line
Company: _______________________________________
Address: ________________________________________________
City/State/ZIP: __________________________________
Phone: ________________________
Contact:______________________________
Date needed: _____________________ Termination date: _____________________
Number of BRI circuits required: _______
We request ISDN BRI (ISDN-2, S0) circuits for use with the Telos Nx12 digital telephone system.
This device interfaces studio audio equipment to ISDN. It requires Circuit Switched Voice (CSV).
The Nx12 has an integral BRI terminal adapter which supports the ETS-300 (Net3) protocol.
Hunt Groups (please give us the option specified below):
□
Please put all MSNs for all BRI’s in a single hunt (ISG or Rollover) group
□
Please create a hunt group with all MSNs except (Specify) ________________
□
No hunt groups
Line Deactivation (please provide the option specified below):
□
Our application is critical and we need to ensure that lines are working at all times. Please set the
switch parameter “Deactivation Allow” to “NO”.
□
We would prefer to know if lines are working at all times. Therefore we request that you set the
parameter “Deactivation Allow” to “NO” if this is possible.
□
Line deactivation is acceptable. Please provide your default setting for this parameter.
You may call the manufacturer of the Nx12, Telos Systems, at +1 (216) 241-7225 for any additional
information about ISDN compatibility. Ask for ISDN Customer Support.