Tripp Lite B004-DUA4-K-R - Manual (Page 5)

5
Operation
There are two ways to access the computers connected to your KVM
switch; Pushbutton or Keyboard Hotkey Commands.
Pushbutton
Press the pushbutton on the KVM to toggle between the connected
computers. When toggling between ports, the default is for the computer,
audio and USB hub functionality to be switched together. To un-bind
either audio or USB hub control from port switching, use the keyboard
hotkey commands listed in the following section.
Keyboard Hotkey Commands
Another way to switch between connected computers is to use keyboard
hotkey commands. Besides allowing you to switch computers, hotkey
commands enable you to perform other functions, such as binding/
unbinding computer switching with audio and/or the USB hub ports, initiate
an auto scan, etc. The following table lists the available keyboard hotkey
commands, explains how to initiate them and describes what they do.
Command Hotkey Description
Select
Computer
Port
[Scroll Lock] [Scroll Lock]
[x]
x = 1, 2, 3 or 4
Switches the KVM focus to the
selected port.
Select USB
Hub Focus
[Scroll Lock] [Scroll Lock]
[Fx]
Fx = [F1] for port 1, [F2]
for port 2, etc.
Selects which computer port has
the focus of the USB hub ports.
Note: When computer and hub
switching are bound together,
switching hub focus will also
switch the focus of the KVM.
Select Audio
Focus
[Scroll Lock] [Scroll Lock]
[Fy]
Fy = [F5] for port 1, [F6]
for port 2, etc.
Selects which computer port
has the focus of the audio and
mic ports. Note: When computer
and audio switching are bound
together, switching audio focus will
also switch the focus of the KVM.
Bind
Computer and
Hub Switching
[Scroll Lock] [Scroll Lock]
[Z]
Binds computer and hub
switching together. This is
enabled by default.
201107247 93-3129.indd 5 9/9/2011 2:33:29 PM