Toto NEOREST MS990CG - Manual (Page 32)

32
Reattach the toilet seat
● Grasp the toilet seat with both hands, making
sure to keep the blue line on the seat cord
straight.
● Insert the toilet seat straight into the seat pins.
● Lower the toilet seat.
✲
Be careful not to get the seat cord twisted when
installing the toilet seat.
✲
Do not install the seat at an angle or use force
when pushing down on it.
L
Approximately
90û angle
Black line:
keep this line
straight when
installing the
toilet seat.
Reattach the lid
● Grasp the lid with both hands and insert straight
down into the toilet seat pins.
● Lower the lid.
✲
Do not install the lid at an angle or use force
when pushing down on it.
Approximately
90û angle
If the toilet seat pins come out:
Left Right
R
L
1. Check the toilet seat pin tips for "right" and "left" markings
to ensure proper installation. 2. Insert the right and left pins all the way into
the respective slots.
✲
Do not apply
force when
pushing the
pins into
the slots.
Toilet seat
pin (left)
L
Cleaning crevices between the main unit and the toilet bowl.
(Perform once a week.)
Clean the crevices with a small
brush.
● Perform routine cleaning of the crevices to prevent water and dirt from getting into the packing.
Protective
Seal
Brush
Neorest 600
main unit
Toilet bowl
Protective Seal