Topcom 6331 - Manual (Page 10)

10
TOPCOM BPM Arm 6331
12 Time adjustment
13 Technical specifications
*Specifications are subject to change without notice.
To adjust the date and time:
•
Press the SET button to activate the display. The
memory zone will be displayed.
• Press the MODE button, the month will blink on the
display.
• Press the SET button succesively to change the
month.
• Press the MODE button to confirm the month. The
day will blink on the display.
• Change the day, hours and minutes as described
above, using the SET button to change and the
MODE button to confirm every setting.
• After setting the minutes, the device is ready to use.
Model
Power source
Measurement zone
Accuracy
Pressure sensor
Inflation
Deflation
Memory capacity
Auto-shut-off
Operation environment
Storage environment
Weight
Cuff Arm circumference
Limited patient
Classification
BPM Arm 6331
6V DC: 4 x AA - Alkaline batteries
Pressure: 0~300 mmHg
Pulse: 40~199 beats/minute
Pressure: ±3 mmHg
Pulse: within ±5% of reading
Semi-conductor
Automatic - Pump driven
Automatic Pressure release valve
3 Memory zones for each 30 memories
1 minute after last key operation
+10°C~+40°C
<85% RH max.
-20°C~+70°C
<85% RH max.
265g (with batteries)
23~33 cm / 9~13 in
Over 18 years old
• Internally powered equipment
• Classification of type BF
• IPX0
• Not suitable for use in presence of flammable
anaesthetic mixture with air or with oxygen or
nitrous oxide
• Continuous operation with short-time loading