Toshiba SD-63HK - Manual (Page 12)

12
■ SCART connection
Connect the SCART OUTPUT socket on the unit to
the SCART INPUT socket on the TV using supplied
scart lead.
Note: If your TV is RGB compatible, slide the VIDEO
OUTPUT selector to left side for better picture
quality.
■ Video connection
Connect the AUDIO (L/R) and VIDEO OUTPUT
sockets on the unit to the AUDIO (L/R) and VIDEO
INPUT sockets on the TV using supplied Audio/
Video lead.
Connections
Notes:
• Refer to the owner’s manual of the connected equipment as well.
• If you place the unit near a tuner or radio, the radio broadcast sound might be distorted. In this case, place the unit away from
the tuner and radio.
• The output sound of the unit has a wide dynamic range. Be sure to adjust the volume to a moderate listening level. Otherwise,
the speakers may be damaged by a sudden high volume sound.
• If your television set has one audio input, connect the unit to a Y lead adapter (not supplied) and then connect to your TV.
Signal flow
To SCART
input socket
To S-
VIDEO
OUT To PR
VIDEO
OUT
To
VIDEO OUT
To
AUDIO OUT
(R=red, L=white)
Audio/Video lead
(supplied)
To SCART OUTPUT socket
To PB
VIDEO
OUT To Y
VIDEO
OUT
To S-video input
To PR video input
To
video input
To
audio input
(R=red, L=white)
To PB video input
To Y video input
Component
video leads
(not supplied)
Scart lead
(supplied)
S-video lead
(supplied)
Select the corresponding video
input on your television to watch
DVD video discs.
Connect the unit directly to your TV. If you connect the unit to a VCR, TV/VCR combination or video selector, the
DVD playback picture may be distorted as DVD video discs are copy protected.
Note: The S-video output and component video output transports the DVD-video signal exclusively and will deliver enhanced
DVD video picture performance.
Make one of following connections depending on your TV.
■ S-Video connection
Connect the S-VIDEO OUTPUT socket on the unit
to the S-VIDEO INPUT socket on the TV using
supplied S-Video lead.
Connect the AUDIO (L/R) OUTPUT sockets on the
unit to the AUDIO (L/R) INPUT sockets on the TV
using Audio lead (not supplied).
Note: Slide the VIDEO OUTPUT selector to right side.
■ Component Video (Color Stream
® ) connection
Connect the COMPONENT OUTPUT sockets on
the unit to the COMPONENT INPUT sockets on the
TV using Component lead (not supplied).
Connect the AUDIO (L/R) OUTPUT sockets on the
unit to the AUDIO (L/R) INPUT sockets on the TV
using Audio lead (not supplied).
Note: Slide the VIDEO OUTPUT selector to right side.
Connecting to a TV
When you connect the unit to other equipment, remove the mains plug before connecting equipment or speakers.