Tektronix PHASER 240 - Manual (Page 99)

Using Color 6
Printing Reference 6-7
Using a Tektronix driver for selecting color corrections
Install a Phaser 240 driver according to the type of computer you are using:
■ Macintosh Phaser 240 driver, for System Software 6.0.7, and 7.0
and higher; see page 2-2 for installation instructions.
■ Macintosh Phaser 240 GX driver, for QuickDraw GX and
System 7.5; see page A-2 for installation instructions.
■ Phaser 240 driver for Windows 3.1; see page 3-3 for installation
instructions.
A color correction setting made in the driver always overrides a downloaded
utility file setting for prints made from the driver. However, the driver’s
Use Printer Setting
option allows you to use the current downloaded utility
file in the printer’s memory.