Sound adjustment, Setting the mts (multi-channel tv sound), Selecting the dual 1 or dual 2 mode – Toshiba 32WLT66A User Manual
Page 22: Selecting the stereo programs, Selecting the bilingual programs, Adjusting the sound quality 1
22
Using the TV’s features (General)
Sound adjustment
Setting the MTS (Multi-channel TV Sound)
- analog only -
Auto mode
The MTS Auto mode automatically recognize stereo/bilingual
programs depending on the broadcast signal.
1
Press
M, then press I or i to display the SOUND menu.
2
Press u or U to select MTS, then press I or i to select
Auto or Mono.
Mono mode
If you experience noise or poor reception of any stereo/
bilingual program, set the MTS mode to Mono.
Noise will be reduced and reception may improve.
Note:
If you experience noise with a particular program on whose
channel reception is usually good, try setting MTS mode to
Auto, then switch
S to e Mono (monaural) (- page 22).
Selecting the dual 1 or dual 2 mode
- analog only -
You can hear only dual 1 or dual 2 sound selected, whenever
bilingual programs are received.
1
Press
M, then press I or i to display the SOUND menu.
2
Press u or U to select Dual, then press I or i to select
Dual 1 or Dual 2.
Notes:
• When the MTS setting is in Mono mode, the Dual menu is
not selectable.
• The Dual menu setting status remains even if the TV is
turned off.
Selecting the stereo programs
- analog only -
1
When a stereo program is received, d Stereo appears.
2
Press
S to select the stereo/monaural mode. d Stereo
and e Mono appear cyclically on the screen.
Selecting the bilingual programs
- analog only -
1
When a bilingual program is received, e Dual appears.
2
Press
S to select the sound to be heard. The sound
differs according to the transmission system: NICAM or
German stereo/bilingual broadcast.
Note:
These settings are not stored in the TV memory.
Adjusting the sound quality
1
From the SOUND menu, press u or U to select an item
you want to adjust.
2
Press I or i to adjust the settings as required.
Dual
MTS
SOUND
1/2
MENU
Back
Watch TV
EXIT
Auto
Dual 1
Treble
Bass
0
0
0
Balance
WOW
OK
Stereo
Display
Sound to be heard
NICAM
German stereo/
bilingual broadcast
j Dual 1
Sub I sound
Main sound
J Dual 2
Sub II sound
Sub sound
e Mono
Main sound
—
Selection
I
Pressing
i
Bass
weaker
stronger
Treble
weaker
stronger
Balance
decreases the right
channel
decreases the left
channel
Dual 1
Bass
0