Toshiba IK-HD1D - Manual (Page 28)

28
䋨 䋨䋨 䋨6䋩 䋩䋩 䋩 SYNC
When an external sync signal is input, the display changes from INT (internal sync) to EXT.(external sync)
automatically.
INT EXT
䋨 䋨䋨 䋨6䋮 䋮 䋮 䋮1䋩 䋩䋩 䋩 INT screen
-- 6 SYNC -- <FILE A>
MODE INT
䋨 䋨䋨 䋨6䋮 䋮 䋮 䋮2䋩 䋩䋩 䋩 Changing EXT. setting
Sync system display
-- 6 SYNC -- <FILE A>
H PHASE -650 to 650
MODE EXT
H PHASE 0
(a) Adjusting horizontal phase
㽲 Move the “㸢” to H PHASE by pushing [MENU UP], [MENU DOWN] buttons.
㽳 Select the desired value of horizontal phase by pushing [DATA UP], [DATA DOWN] buttons.
䌛DATA UP䌝
䋭650 0 650
䌛DATA DOWN䌝
* If the phase difference is large, continuously pressing on the [DATA UP]/[DATA DOWN] button
will make the setting shift by tens.
Move up and down
by pushing
MENU UP,DOWN Select the desired
value by pushing
DATA UP,DOWN