Thecus Technology N299 - Manual (Page 11)

o
Blinking red (5 seconds): USB device connection failure
• Data Transfer
o
Blinking blue: Active data transfer
o
Blinking red: USB device read/write error
USB Port • USB 2.0 port for USB storage expansion.
Power Button • Power on/off N299
Rear Panel
The rear panel of the N299 houses the USB and Ethernet connections, as well as
the power connector. See the table below for descriptions of each:
Item Description
Power Connector
• Connect the included power cord to this connector
WAN Port • WAN port for connecting to an Ethernet network through a
switch or router
LAN Port • LAN port for connecting to an Ethernet network through a switch
or router
USB Ports • USB 2.0 ports for storage expansion
There are two USB ports at the back panel
of N299, you can use either one, but not
two at the same time.
NOTE
11