TC Electronic Tube-Tech CL 1B TDM - Manual (Page 5)

EE
NN
GG
LL
II
SS
HH
Tube-Tech CL 1B / 9
EE
NN
GG
LL
II
SS
HH
8 / Tube-Tech CL 1B
Presets section
Via the Presets section you are able to recall, store and compare different settings.
11 - File
Press FILE to open the File menu.
Load Preset: Select to load presets from the default preset location.
Save Preset: Select to save the preset in My Presets folder.
My Presets: Via “My Presets” you are able to load you own presets.
If you chose to store presets in other locations than the “My Preset” folder,
these presets will not appear in the “My Preset” drop down menu. However, you
can still navigate to, and load these presets via the Load Preset function.
12 - Preset name
This is the name of the preset.
Default Preset Locations
The following locations will describe where you can find the CL 1B presets, which are
stored in a folder unique to each plug-in:
Mac OS X preset paths:
Factory presets:
<Macintosh HD>/Library/Application Support/Tube-Tech/CL 1B/Presets/
User presets:
<your user name>/Library/Application Support/Tube-Tech/CL 1B/Presets/
....continued
10 - Sidechain Link
The Sidechain Link function is relevant only when CL 1B is used on a stereo audio
file. In Left+Right mode it creates a dynamic master/slave relation between right and
left channels, allowing the channel where most compression is applied to also control
the compression amount of the other channel. This is similar to the sidechain
functionality you have available when connecting two hardware CL 1B (mono) units for
the purpose of processing in stereo.
In Left mode the compression amount applied on the left channel also controls the
compression amount applied on the right channel. In Right mode we have the exact
opposite situation.
Please note: The Sidechain in the CL 1B is stricly internal, and cannot be controlled
by an external signal through the Pro Tools|HD plug-in key input