Tripp Lite B118-304-R - Manual (Page 2)

2
1. Introduction
Tripp Lite HDMI v1.3 Splitters broadcast a signal from an HDMI source to multiple HDMI displays. Up to 64
displays can be connected by cascading additional splitters.
Product Features
• Connects to both HDMI and DVI-D single link* displays
• Compatible with 720i, 720p, 1080i and 1080p resolutions
• HDMI v1.3 and HDCP compliant
• Permits display to be located up to 130 ft. (40 m) or more** from the source
Package Contents
• B118-302-R or B118-304-R HDMI v1.3 Splitter
• Power Adapter
• Owner’s Manual
*Using a Tripp Lite P566-Series HDMI to DVI-D Single Link adapter cable (sold separately). DVI monitors will not provide audio when receiving
a signal from the splitter.
** Longer ranges are possible by using higher-gauge cable, or at resolutions lower than 1080p. Contact Tripp Lite for more information.
2. Installation
2.1 Standalone Installation
1a B118-302-R 2-Port Splitter: Connect the splitter’s integrated cable to the HDMI source.
1b B118-304-R 4-Port Splitter: Connect a Tripp Lite P568-series HDMI cable* from the HDMI Source to the
HDMI Input Port on the splitter.
2
Connect a Tripp Lite P568-series HDMI Male-to-Male cable from the Output Port of the splitter to the
HDMI or DVI** display. Repeat this step for each additional display. The Output Port LED will illuminate
when the port is connected to a powered-on display.
3
Connect the included power adapter from the splitter to an appropriate power source. It is recommended
that the power adapter be plugged into a Tripp Lite surge suppressor. The Power LED (B118-304-R only)
will illuminate when the splitter is plugged into a power source. Note: Use only the power adapter that is
included with your unit.
* Sold separately. Maximum Length - 16 ft.
** Using a Tripp Lite P566-series HDMI to DVI-D Single Link adapter cable (sold separately). DVI monitors will not provide audio when
receiving a signal from the splitter.
2.2 Cascaded Installation
The B118-302-R and B118-304-R are designed to cascade up to 3 levels, allowing you to connect to up to
64 displays (when cascading three levels of B118-304-R splitters). The B118-302-R and B118-304-R can be
cascaded together, providing more fl exibility when expanding the number of connected displays.
TV Display Source B118-304-R B118-304-R B118-304-R
A
maximum length 16 ft. ( Part # P568-016)
B
maximum length 25 ft. ( Part # P568-025)
All cables are Tripp Lite P568-series HDMI M/M cables:
A B B B
200805026 93-2788 B118-304-R 4-port HDMI Splitter OM.indd 2 200805026 93-2788 B118-304-R 4-port HDMI Splitter OM.indd 2 7/2/2008 9:51:56 AM 7/2/2008 9:51:56 AM