Toshiba A10 Series - Manual (Page 95)

O
PERATING
B
ASICS
4-13
Writing CD/DVDs on DVD-R/-RW drive
❑
Since the disc is based on the DVD standard, it might be filled with dummy data
if the written data is less than about 1 GB. Even if you write only a small amount
of data, it might take time to fill in the dummy data.
Before writing or rewriting
Please observe the following points when you write or rewrite data.
❑ Be sure to connect the universal AC adaptor before you write or rewrite.
❑ Be sure to close all other software programs except the writing software.
❑ Do not run software such as a screen saver, which can put a heavy load on the
CPU.
❑ Operate the computer in the full-power mode. Do not use power-saving
features.
❑ Do not write while virus check software is running. Wait for it to finish, then
disable virus detection programs including any software that checks files
automatically in the background.
❑ Do not use hard disk utilities, including those intended to enhance HDD
access speed. They may cause unstable operation and data damage.
❑ Write from the computer's HDD to the CD/DVD. Do not try to write from shared
devices such as a LAN server or any other network device.
❑ Writing with software other than Drag'n Drop CD+DVD is not recommended.
When writing or rewriting
Please observe/consider the following when you write or rewrite to a CD-R/RW or
DVD-R/-RW disc.
❑ Do not perform any of the following actions when writing or rewriting:
• Operate the computer for any other function, including using a mouse or
Touch Pad or closing/opening the LCD panel.
• Start a communication application such as a modem.
• Apply impact or vibration to the computer.
• Install, remove or connect external devices, including the following:
PC card, USB devices, external display, optical digital devices.
• Use the Audio/Video control button to reproduce music or voice.
❑
Do not use standby/hibernation while writing or rewriting.