Care and cleaning, Stainless steel surfaces, Aluminum and plastic surfaces – Thermador HDDW36FS User Manual

Page 8

Advertising
background image

PAGE 8

CARE AND CLEANING

IMPORTANT: Do not clean the hood with abrasive
sponges or with cleaning agents which contain sand,
soda, acid or chlorine!

ṇ

CAUTION. Avoid risk of crushing. Do not catch hand

between the filter brackets. Do not insert the filter drawer
while cleaning it.

❑ When cleaning the grease filters, remove grease

deposits from accessible parts of the housing.
This prevents the risk of fire and ensures that the hood
continues operating at maximum efficiency.

❑ Note: Do not use alcohol (spirit) on plastic surfaces,

as dull marks may appear.

Caution: Observe all instructions and cautions
provided with cleaners.

IMPORTANT: Clean the operating buttons with a mild
soapy solution and a soft, damp cloth only.
Do not use stainless-steel cleaner to clean the operating
buttons.

Stainless steel surfaces:

❑ Use a mild non-abrasive stainless steel cleaner.

❑ Clean the surface in the same direction as it has been

ground and polished.

❑ We recommend the stainless steel cleaner Fantastik

®

or Formula 409

®

sprayed onto a paper towel.

Aluminum and plastic surfaces:

❑ Do not use dry cloths.

❑ Use a mild window cleaning agent.

❑ Do not use aggressive, acidic or caustic cleaners.

Observe the warranty regulations in the enclosed
service booklet.

ṇ

WARNING. To avoid risk of fire and explosion do not use flammable liquids or solvents.
Always unplug or disconnect the appliance from the power supply before servicing.

ṇ

Do not insert the filter drawer while cleaning it.

Danger of crushing!

❑ Clean the hood with a hot soap solution or a mild

window cleaner.

❑ Do not scrape off dried-on dirt but wipe off with a

damp cloth.

Advertising