Troy-Bilt TBR16 - Manual (Page 5)

Mower Set-Up
Attaching the Handle
Secure the upper handle to the mid handles with two 1.
carriage bolts, two saddle washers and two wing knobs.
See Fig. 3-1.
Secure the handle assembled in step 1 to the lower handle with 2.
four carriage bolts, four saddle washers and four wing
knobs. See Fig. 3-2.
Position the complete handle assembly over the studs on the
3.
rear of the mower frame. See Fig. 3-3.
Figure 3-2
Figure 3-3
Figure 3-1
Contents of Crate
One Upper Handle • Two Mid Handles • One Lower Handle •
Six Carriage Bolts • Six Wing Knobs • Six Saddle Washers •
One Grass Catcher (TB R18 Only) • One Operator’s Manual • One Product Registration Card •
Assembly & Set-Up
3
5