Toshiba SD-1810 - Manual (Page 20)

20
SKIP
DISPLAY OPEN/CLOSE
SUBTITLE
AUDIO
SEARCH
(JUMP)
ENTER
CLEAR
(CANCEL)
SET UP
A - B RPT MARKER
PLAY MODE
ANGLE
PAUSE/STEP ZOOM SLOW
RETURN TOP MENU
PLAY
STOP
REV FWD
0 T
8 7 9
6 5 4
3 2 1
SKIP
MENU
Language
OSD Language English English
Francais
Espanol
Other
/Enter/Setup/Return
Picture Parental Sound
Language
OSD Language English
Other
/Enter/Setup/Return
Picture Parental Sound
4
Preparation The setup language can be selected.
• Turn ON the TV and select to the corresponding video input.
• When using an amplifier, switch on the amplifier.
Press or ENTER and
then press or to se-
lect desired language(e.g.
English), then press
ENTER.
2
From the stop mode press
SET UP.
NOTE: To exit the SETUP screen, press SET UP
(or RETURN) while the SETUP screen is displayed.
If the unit does not operate properly:
Static electricity, etc., may affect the play-
er's operation. Disconnect the AC power
cord once, then connect it again. •
3
Press or ENTER
to select “OSD Language”.
Press or to select
“Other”.
Language Other
/Enter/Setup/Return
Picture Parental Sound
1
Press (POWER) on
the unit or on the remote
control to turn on the unit.
The POWER indicator will
light up.
“Reading” display will
change to “No Disc”.
(If DVD disc has already
loaded, playback will start
automatically.)
welcome
No Disc
Language setup
2B50101A P12-21 8/21/02, 3:27 PM 20