Tyan Computer THUNDER N3600QX - Manual (Page 6)

pin header
●
Four SAS ports
●
Four SATA ports
●
One IDE connector
●
Two USB headers
●
One COM port header at 3.0Gb/s
Rear Side
●
One InfiniBand connector (apart
from I/O backplane, optional)
●
External SAS connector (four-in-
one)
●
Three RJ-45 ports with LEDs
- One RJ-45 100 for OPMA card
use
- Two (side by side) RJ-45
10/100/1000 for LAN ports
●
Two (side-by-side) USB 2.0 ports
(single port)
●
One VGA port
●
One COM port
●
PS/2 mouse and keyboard
connector
●
ID LED
●
IB/SAS LED
Onboard InfiniBand Network
Controller (optional)
●
Mellanox InfiniHost III Lx DDR
MT25204A0-FCC-D single port
●
Memory on DIMM, PCI-E x8
interface
●
DDR model as default
●
S4987WG2NR: w/o IB onboard;
S4987WG2NRI2: w/ IB onboard.
Onboard Graphics Controller
●
ATI® ES1000 controller
●
32MB DDR frame buffer
Integrated SAS Controller
●
LSI 1068E SAS controller
●
PCI-E x4 interface
●
Supports eight SAS ports (4 ports
internal, 4 ports external)
●
RAID 0,1, and 1E supported
Integrated SATA Controllers
●
Supports Four (4) SATA-II ports
running at 3.0Gb/s from MCP55
●
RAID 0, 1, 5, 10 capable
Integrated LAN Controllers
●
Two GbE via Marvell PHY
88E1121
●
Supports WOL and PXE
●
Two RJ-45 ports with LED
BIOS
●
AMI 8Mbit LPC Flash ROM
●
Serial Console Redirect
●
USB boot supported
●
Supports APM1.2 and ACPI
●
PnP, DMI, WfM power
Management
●
S0/S1/S4/S5 states supported
Form Factor
●
16.63”x 16.098”
Power Supply
●
12V and 5VSB input only.
●
On board connector : FCI 51915-
080
Regulatory
●
FCC Class A (DoC)
●
European Community CE (DoC)
●
VCCI
●
C-tick
●
BSMI (Optional)
6