8band practice – Tapco MIX.FX MIX10FXP User Manual
Page 8
Drum Kit Mics
Vocal
Microphones
6912 Passive Speakers
(plays mono main mix)
Amp Mode
switch set to
Main/Mon
Bass
Guitar
Electric
Guitar
DI Box
Guitar
Processor
Thump TH-18s Powered Subwoofers
Pole Mount
TAPCO Link.USB
Digital Audio Interface
Laptop
USB
CD Player
iPod Dock
Floor Monitors
(play monitor mix)
This diagram shows drum kit microphones connected to channels 1 to 4, a guitar connected via a TAPCO
DI box to channel 5, a guitar processor connected to the line input of channel 6, vocal mics connected to
channels 7 and 8, a CD player connected to channel 9's stereo RCA inputs, and an iPod dock connected to
channel 10's stereo RCA inputs. A TAPCO Link.USB Digital Audio Interface is attached to the stereo tape outputs
to record the performance via USB to a laptop.
The amp mode switch is set to main/mon. Passive stage monitors are connected to the speaker-level Ch.B
output, and play the monitor mix for your performers. TAPCO 6912 passive speakers are connected to the
speaker-level Ch.A output, and they play the main mono mix to your audience. TAPCO Thump TH18s powered
subwoofers are connected to the main line-level outputs, to reinforce the low end in your system.
8
Band Practice