Trek 11i EN - Manual (Page 16)

4
CLK
TME
AVG
MAX
TRP
ODO
MH
Mode
Set
To set wheel size
Both the 9i and 11i allow you to use two different wheel sizes. The icon
for Wheel 1 is a small circle. The icon for Wheel 2 is a partial circle
surrounding the Wheel 1 icon (Figure 14).
Easy setup (reSet)
1. Cycle Mode to TME.
2. Hold Set•
Wheel Select icon appears on the screen.
3. Cycle Set• to change wheel selection from
Wheel 1 to Wheel 2.
4. Push Mode to select.
Wheel size appears.
Note: If you want to set a custom wheel size,
go to page 24 now.
5. Cycle Mode
The wheel size changes.
6. Hold Set• to select.
The computer returns to current speed.
To set the second wheel size, repeat the instructions, but
select the other Wheel Select icon.
Figure 4- Wheel select screen