Topcom BUTLEER 2900 C User Manual
Page 9
Topcom Butler 2900C
9
ENGLISH
Topcom Butler 2900C
•
Enter the number of the base unit you would like to subscribe the
handset to (1-4)
•
The unit will start searching for the base and when found it will ask to
enter the pin code (4 digits):
•
Enter the base pin code (0000). If the pin is wrong, the handset will
restart the searching for the base.
•
When the handset is registered, it will show ‘HS’ followed by the
handset number.
5.2 REMOVING A HANDSET
You can remove a handset from a base to allow another handset to be
registered:
•
Press and hold the mute
and redial key
for 3 sec.
•
Enter the pin code (0000). If the pin is wrong, the handset will go
back to standby.
•
Enter the handset number (1-5) you want to remove
•
The unit will go back to standby is the removal is successfully. If not,
it will ask again to enter the handset number
Remark: You can only remove existing handsets and others
then the one you are using
PIN
PIN 1234 H5-
B2900_C.book Page 9 Friday, January 9, 2004 1:39 PM