TRENDnet TE100-P1U - Manual (Page 37)

- 37 -
Installing the LPR for TCP/IP
Printing Client
Before your Windows 98/ME workstation can print using the lpr
protocol, you will need to install the client program, as follows:
1. Make sure that you have installed the TCP/IP protocol, and have
properly configured the Windows 98SE/ME TCP/IP settings.
You can install the protocol from the Network control panel if
necessary.
2. From the Start menu, choose the Settings submenu, then the
Control Panel item within it. Windows will display the
Control Panel folder.
3. Double-click on the Network icon in the Control Panel folder.
4. Click on the Add... button on the Configuration tab.
5. Windows will ask for the type of component to add. Select
Client and click Add... to continue.
6. When Windows asks you to select a network client, click the
Have Disk... button.