Tanaka TED-262DH - Manual (Page 12)

www.tanaka-usa.com 11 [email protected]
Owner’s Manual TED-210/TED-262L/R/DH/HS
Maintenance schedule
Below you will find some general maintenance instructions. For further information, please contact your
servicing dealer.
Daily maintenance
• Clean the exterior of the unit.
• Check that the drilling attachment is properly centered, sharp, and without cracks. An off-center
bit induces heavy vibrations that may damage the unit.
• Check that the drilling attachment is sufficiently tightened.
• Check that nuts and screws are sufficiently tightened.
Weekly maintenance
• Check the starter, especially cord and return spring.
• Clean the exterior of the spark plug,
• Remove it and check the electrode gap. Adjust it to 0.6 mm (.024’), or change the spark plug.
• Clean the cooling fins on the cylinder and check that the air intake at the starter is not clogged.
• Check that the gear case is filled with grease up to 3/4.
• Clean the air filter.
Monthly maintenance
• Rinse the fuel tank with gasoline.
• Clean the exterior of the carburetor and the space around it.
• Clean the fan and the space around it.