Tektronix 200 Series User Manual
Page 25
Network Printing with Tektronix Color Printers
2
User Manual
2-13
PC users
This procedure resets the printer by sending a PostScript language Þle over a
serial or parallel connection. You can also reset the printer by sending a
PostScript language Þle over a NetWare connection, after you have Þnished
the NetWare conÞguration described in Chapter 4.
1.
Locate the RESET.PS Þle in the NET-UTIL directory on the PC
version of the printerÕs network utilities diskettes or copy the Þle
to your hard disk.
2.
Change to the directory containing the Þle. For example, type:
CD NET-UTIL
3.
Use the DOS COPY command to send the Þle to the printer. For
example, type:
COPY RESET.PS LPT1:
Workstation users
This procedure resets the printer by sending a PostScript language Þle over a
TCP/IP connection. You will not be able to use this method until you have
completed the TCP/IP conÞguration described in Chapter 5.
Before performing this procedure, you must install the Þles from the UNIX
version of your printerÕs network utilities diskettes on to your host
computer (see ÒInstalling Þles from your printerÕs network utilities
diskettesÓ on page 5-3).
1.
Change (cd) to the directory where you placed your printerÕs
network utilities.
2.
Send the Þle to the printer. For example, type:
lpr -P
queue-name reset.ps