Topcom Butler 4812 USB VOIP User Manual
Page 17
Topcom Butler 4812 USB VoIP
17
Topcom Butler 4812 USB VoIP
ENGLIS
H
•
‘EXTERNAL‘ appears on the display.
•
Press the Programming key .
•
‘MELODIES‘ appears on the display.
•
Press the Programming key .
•
The currently set ringer melody appears on the display.
•
Enter a number between 1 and 9 to select he desired ringer melody. Use the number
keypad to do this.
•
Press the Programming key
to confirm your selection.
4.17.2 Setting a ringer melody for internal calls (1-9)
•
Press the Programming key .
•
Press the Up or Down key
repeatedly until ‘RING SEL’ appears on the display.
•
Press the Programming key .
•
‘EXTERNAL‘ appears on the display.
•
Press the Up or Down key
repeatedly until ‘INTERNAL’ appears on the display.
•
Press the Programming key .
•
‘MELODIES‘ appears on the display.
•
Press the Programming key .
•
The currently set ringer melody appears on the display.
•
Enter a number between 1 and 9 to select the desired ringer melody. Use the number
keypad for this.
•
Press the Programming key to confirm your selection.
4.18 Setting the ring volume and melody of the base
4.18.1 Setting the base ring volume (0-9)
•
Press the Programming key
.
•
Press the Up or Down key
repeatedly until ‘RING SEL’ appears on the display.
•
Press the Programming key
.
•
‘EXTERNAL‘ appears on the display.
•
Press the Up or Down key
repeatedly until ‘BASE’ appears on the display.
•
Press the Programming key
.
•
Press the Up or Down key
repeatedly until ‘VOLUME’ appears on the display.
•
Press the Programming key
.
•
The current volume level used appears on the display.
•
Enter a number between 0 and 9 to select the desired ringer volume. Use the number
keypad to do this.
•
Press the Programming key to confirm your selection.
4.18.2 Setting a ringer melody
•
Press the Programming key .
•
Press the Up or Down key
repeatedly until ‘RING SEL’ appears on the display.
•
Press the Programming key .
•
‘EXTERNAL‘ appears on the display.
•
Press the Up or Down key
repeatedly until ‘BASE’ appears on the display.
•
Press the Programming key
.