Operating a tv with the remote control – Toshiba SD-9200 User Manual

Page 63

Advertising
background image

66

Function setup

Operating a TV with the remote
control

You can operate the basic functions of selected TVs
using the supplied remote control.

Operating a TV with the remote control

To program the remote control

1 While holding down ENTER, press the number

buttons that correspond to your TV’s brand code
referring to the list on the next page.

e.g. To Program brand code 0071.

Hold down.

2 Release ENTER.

The DVD remote control memorizes the selected
brand code.

Preparation

Follow the instruction of “To program the remote control” to set the brand code.

ENTER

0

0

1

7

VOL
CH

TV/VIDEO

POWER

Notes
• The remote control is programmed at the factory to operate

TOSHIBA TVs.

• A single brand may use different codes depending on the

particular model. Enter the correct number referring to the
brand code table.

• For some brands, several brand codes are provided. Try

each of them until the remote control operates your TV.

• Some TVs may not respond to all of the functions in the

table above, or may not be operated at all with this remote
control. In this case, operate that TV with its own remote
control.

• If you replace the remote control’s batteries, remember to

reprogram the brand codes for TV.

Point the remote control at your TV, and
use buttons as follows.

POWER

To turn the power on and off.

TV/VIDEO

To select a video input.

VOL /

To adjust the volume.

CH /

To select a channel.

VOL
CH

TV/VIDEO

POWER

Close the cover to
use these buttons.

ENTER

Number buttons

Advertising