Toshiba pmn - Manual (Page 44)

81 80
<Operation>
1 Press the “ fi” button to select
[MODE LOCK].
2 Press the “ #” or “ ” button.
3 Press the “ fi” button and
select either [ON] or [OFF].
4 Press the “ @” button (or “ ”
button) to complete the setting.
Mode Lock ON/OFF
Before power
is turned OFF:
<Setting example>
Flash: No Flash
Image Quality: Super Fine
White Balance mode:
Fluorescent
After power is
turned ON:
When mode lock is
enabled, the function
modes set when the
camera was turned off
are restored when the
camera is turned on
again. When mode lock is
disabled, all function
modes are returned to
their default values when
the power is turned on
again. (For default
values, see page 87,
<Functions and Contents
of Default Values>.)
<Difference in Displays when Mode Lock is ON and
OFF>
When enabled, this function preserves the camera mode functions set
when the camera power is turned OFF. As a result, the same mode
settings are restored when the power is next turned ON. When this
function is disabled, any mode functions previously set will be returned
to their default values when the power is turned OFF and then turned
ON again.