Toshiba B-SA4TP SERIES - Manual (Page 98)

APPENDIX 1 MESSAGES AND LEDS ENGLISH VERSION EO1-33048
APPENDIX 1 MESSAGES AND LEDS
EA1- 3
NOTE: Description of Command Error
• If a command error is found in a command received, 16 bytes of the command error, starting from the command
code, will be displayed. (However, [LF] and [NUL] will not be displayed.)
Example 1
[ESC] T20 G30 [LF] [NUL]
Command
error
The following message appears.
Example 2
[ESC] XR; 0200, 0300, 0450, 1200, 1, [LF] [NUL]
Command
error
The following message appears.
Example 3
[ESC] PC001; 0A00, 0300, 2, 2, A, 00, B [LF] [NUL]
Command error
The following message appears.
• When the error command is shown, “? (3FH)” appears for codes other than codes 20H to 7FH and A0H to DFH.
• For details, please refer to the B-SA4T Series External Equipment Interface Specification stored in the CD-
ROM.
T20G30
B-SA4T V1.0A
XR;0200,0300,045
B-SA4T V1.0A
PC001;0A00,0300,
B-SA4T V1.0A