GIGASET COMMUNICATIONS GMBH 5020 - Manual (Page 4)

gigaset 5020 / IM eng-fra-russ-kro / A30350-M209-A801-7-UP19 / 5020.fm / 24.02.2011
4
GB
Adjusting the telephone
Adjusting the ringer volume
The volume of the ringer can be set to one of 4 levels and
can also be deactivated completely (default setting: level 4).
◆ To adjust when the telephone is idle:
?5
Initiate function.
H
...
I
Adjust the volume with the Loud/Quiet key.
?
Press the Set key.
◆ To adjust while the telephone is ringing:
Press
H
...
I
before lifting the handset.
The last value set is saved.
Setting the ringer frequency
The frequency (speed) of the ringer can be set to one of
three levels (default setting: level 3).
?6
Initiate function.
1
...
3
Press one of the keys 1...3:
1: highest frequency; 3: lowest frequency.
?
Press the Set key.
Setting the ringtone
Ten different ringtones can be set for the ringer (default
setting: ringtone 9).
◆ To set with the telephone is idle:
?7
Initiate function.
0
...
9
Press one of the keys 0 ... 9
?
Press the Set key.
◆ To set while the telephone is ringing:
0
...
9
Press one of the keys 0 to 9.
Setting the handset volume
The volume on the handset can be set to one of 3 levels and
saved (default setting: level 1).
?9
Initiate function.
H
...
I
Adjust the volume with the Loud/Quiet key.
?
Press the Set key.
Mute
You can deactivate the telephone's handset and
microphone. Then the other party can no longer hear you.
J
During a call: Press the Mute key
Activate: Press the key again.
Adjusting the loudspeaker
While in handsfree mode, you can set the volume to one of
7 levels and save it (default setting: 1).
H
...
I
Adjust the volume with the Loud/Quiet key.
Activating/deactivating the mute melody
You can activate and deactivate the mute melody for the
mute (default setting: on).
?19#
Initiate function.
0
/
1
0: deactivate; 1: activate.
?
Press the Set key.
Baby call (direct call) number setting
If a phone number is set for the Baby Call function, it is
dialled automatically when the telephone is locked
(s. "Activating/deactivating the telephone lock") after you
lift the handset (or press the Loudspeaker key) and press
any key (except
?
,
L
,
H
and
I
). The telephone
does not allow other phone numbers to be dialled, but
incoming calls can be received.
?82
Initiate function.
o
Enter direct call number (max. 32 digits).
?
Press the Set key.
When the baby call function is activated, you will see
è
and
{
in the display.
Deactivating
?80
Initiate function.
?
Press the Set key.
Deleting a baby call phone number
?1253
Initiate function.
?
Press the Set key.
Activating/deactivating the telephone lock
The telephone can be locked completely (with the exception
of a baby call phone number if set) so that it cannot dial any
phone numbers, including the baby call phone number. You
can continue to receive incoming calls.
?8
Initiate function..
0
/
1
0: unlock; 1: lock
?
Press the Set key.
When the telephone is locked, you will see
{
in the
display.