Toshiba GL-1010 - Manual (Page 16)

16
GL-1010 Scan Operator’s Guide
This preface introduces the scanning functions you can perform
with the e-STUDIO GL-1010 Electronic Document Processing
System and defines the scope and audience of this guide.
INTRODUCTION
e-STUDIO GL-1010 Electronic Document Processing
System
Congratulations on purchasing Toshiba’s optional Scan Feature
for the e-STUDIO GL-1010 system. The scan option has been
designed to be the latest state-of-the-art scan and copier
combination. When the TOSHIBA e-STUDIO GL TWAIN
Driver software is installed, the digital copier becomes a all-
inclusive network scanner with walk-up, internet scan to iFax
capability. The GL Scan option provides ease of use, and fully
comprehensive solutions. Workgroups will enjoy the ability to
exploit almost limitless capabilities of the digital copier.
INTENDED AUDIENCE
Who Should Read This Guide?
This guide, the GL-1010 Scan Operator’s Guide, is intended for
people using the GL Scan optional feature. It provides detailed
instructions on configuring and using the TOSHIBA e-STUDIO
GL TWAIN Driver software.
This guide is not intended for digital copier service technicians or
operators. For information on using and maintaining the
TOSHIBA e-STUDIO28/35/45 digital copier, refer to the Toshiba
Operator’s Manual for Copying Functions or contact your
Toshiba authorized dealer for support.
Scope
This guide assumes that users are familiar with the software
applications they are using to create their documents for printing.
Document setup or application-specific printing functions are not
covered in this manual.
GL-1010 Scan Operator's Guide.book Page 16 Friday, October 5, 2001 10:30 AM