Tekkeon MP3300 - Manual (Page 10)

8
View myPower ALL Battery Capacity
The capacity in myPower ALL will decrease as the battery powers and/or charges your devices.
The remaining voltage is shown on the voltage indicator, which is accessed as described below. As the
voltage decreases, the lights will turn off in sequence from right to left. When the myPower ALL battery
capacity is low, only the red EMPTY light will be on. You should recharge myPower ALL at this time.
When myPower ALL is completely out of battery, all lights will be off. At this point, you must charge
myPower ALL.
1. With the voltage lock in the locked
position (LOCK) and the adapter
plug/power output cord, or the
power adapter connected, press and
hold the voltage selector. When you
release the voltage selector, the
battery capacity indicators will turn
off, and one indicator will turn on to
indicate the voltage selection.
Recording Device Information
The Device At-A-Glance Card included with myPower ALL enables
you to record the information you need to use myPower ALL with
each of your portable devices. Simply record the device name,
required voltage, and reference letter for the compatible adapter.
Store the card in the pocket provided inside the leather case.
Red Indicator 1-5% (Recharge before using)
1st Green Indicator 5-15%
2nd Green Indicator 15-25%
3rd Green Indicator 25-40%
4th Green Indicator 40-55%
5th Green Indicator 55-70%
6th Green Indicator 70-85%
7th Green Indicator 85-100%
CAPACITY INDICATOR